Pages

Past Challenges #1 - #178

Thursday, March 21, 2013

Thursday Tutorial - Shaped Card

Hi there! Rachel here from Cricut with Heart sharing my first Thursday Tutorial with you. This was something I discovered out of necessity a while back when I wanted to make a mitten shaped card but my Gypsy was broken and I couldn't get Cricut Craft Room to work with my laptop.

First locate the cut line on your cutting mat.  It will be easy to see the edge of where the blade will cut when you have a used mat like this one.

Once you have located the cut line on your mat, position a folded piece of cardstock on the mat, with the folded edge just below the cut line.

I cut the mitten shape from page 79, Accent 2, at 5 1/4".  You'll need to use the Multi Cut feature since you're cutting through 2 sheets of paper.


Once it's cut, you'll have a section at the top that still has the fold in it since it was below the cut line.  So now you have a shaped card!  Easy, huh?

Next, all you have to do is decorate it and you're done!  Here is how my mitten card turned out after I added some layers and trimmings.

I hope you'll try this fun and easy way to make a shaped card out of almost any Cricut cut.  You could try this with a kite or balloon Cricut cut and enter it in our Spring is in the Air challenge this week!

Happy Crafting!


post signature

19 comments:

  1. Awesome!!! I haven't thought of that and will give it a try!!!

    ReplyDelete
  2. What a great tip!! Thank you.
    Myrna

    ReplyDelete
  3. What a fabulous tip, Rachel! Thank you so much for sharing it with us!

    Diana :)
    Leelee Card Designs

    ReplyDelete
  4. Great idea. Thanks for sharing.

    ReplyDelete
  5. Such a great tutorial! I never would have thought of doing this. Awesome job for your first one! Can't wait for the next!
    Crafty Hugs :)
    Emily

    ReplyDelete
  6. Great tip and will have to try this out!!!

    ReplyDelete
  7. Not done it that way before. Will give it a try.
    Melissa
    "Sunshine HoneyBee"

    ReplyDelete
  8. This is so clever, I do it with my Spellbinders but never thought of trying it with my Cricut !! Amazing Tutorial Rachel !! xhugs Nikki

    ReplyDelete
  9. This is a super idea! Thanks for shairng it with us.
    D-
    designsbydragonfly.blogspot.com

    ReplyDelete
  10. Just a question ... does the top part of the paper not move when it is being cut or did I miss something? It is an awesome idea, the cricut has lots of designs that I would love to make into a shaped card!

    ReplyDelete
    Replies
    1. Hi Brenda, I didn't have any trouble with the folded top part moving while being cut. I suppose it could be lightly taped together with removable adhesive if that happens. Let me know how it works out for you! :)

      Delete
  11. What an excellent idea!!! I'm going to have to give this a try! And it gives me an excuse to buy a new springtime cartridge. Yeah!

    ReplyDelete
  12. Oh man..this tutorial is about 48 hours late from saving me pulling out chunks of hair. I literally settled on cutting the base with my cricut and then tracing and handcutting a card shape and then building on top with the rest of the cricut layers. This is AMAZING!! I'm off ot make another shaped card now just to try it out! You rock!

    ReplyDelete
  13. Thanks I love this and will start doing this instead of hand cutting the shaped cards. Your ideas are great

    ReplyDelete

Thank you for taking the time to share your comments. We hope you were inspired today. Please note: all posts are monitored and show up after approved.