Pages

▼

Past Challenges #1 - #178

▼

Thursday, February 27, 2014

Thursday Tutorial--Layering Heat Transfer Vinyl

Hi, everyone and welcome to another Thursday Tutorial!  Last week I showed you how to used iron on vinyl with your Cricut.  Today I'm going to show you how to layer iron-on vinyl on your fabric project.


Thanks for watching--I hope this helped!  Have you ever used your Cricut to cut iron-on vinyl for a fabric project?  Tell us about it in the comments.  Thanks for dropping by today!
post signature

2 comments:

  1. AnonymousFebruary 27, 2014 at 10:06 AM

    I have recently done several projects with the heat transfer vinyl. So glad for the demonstration on layering vinyl. I did layer a couple of things and I did find that they didn't always fit just right. Your tips I'm sure will help. Thanks. Dillie Elliott

    ReplyDelete
  2. maryFebruary 27, 2014 at 12:55 PM

    Why did you use the sheet of paper and what kind of paper was it? What kind of transfer film did you use that was clear and you could use the iron over it?

    ReplyDelete

Thank you for taking the time to share your comments. We hope you were inspired today. Please note: all posts are monitored and show up after approved.