Pages

Past Challenges #1 - #178

Tuesday, September 28, 2010

Quick Tip Tuesday - Transporting Your Cricut


I recently learned that the cardboard boxes which came with my Cricut were to be kept and used during times that I travel with my machine.  Apparently, these boxes secure the springs inside the blade housing unit.  If your machine is new, or if you have kept your boxes, be sure to use them when you are transporting your Cricut.

But what about those of us who recycled our boxes after opening the machine?  Not to worry, you can use bubble wrap.  Before closing up your machine, remove the blade assembly unit from the machine.  Next, manually move the blade housing unit to the centre of the cutting area.  Take two bits of bubble wrap and tuck one on each side of the housing unit.  They should fit fairly snugly to offer support.  Finally, close the machine – and don’t forget to take your blade assembly with you!

* The blade housing unit is the “box-like” unit that holds the blade assembly, the cylindrical unit that removes from the machine and holds the blade itself.

Happy crafting!


post signature

4 comments:

  1. great tip! Thank you xxx

    ReplyDelete
  2. Thanks for the tip! I did not realize I was supposed to keep all that stuff.

    ReplyDelete
  3. Great tip, and very timely for me. I am moving on Monday!!

    ReplyDelete
  4. Great tip since I just carried mine to Italy with me! Made it safe and sound!

    ReplyDelete

Thank you for taking the time to share your comments. We hope you were inspired today. Please note: all posts are monitored and show up after approved.